OlyLog Fasteners
OlyLog is the first threaded structural log home fastener to require no predrilling.
Since its introduction, OlyLog has changed the way log homes are constructed.
- Installs faster and easier than lags & spikes
- Countersinks into log – Allows log to settle naturally
- Draws warped logs down
- Removable and reusable
- Eliminates jarring and damage caused by a sledgehammer
- ACQ approved
- Oly Log Screws are available in lengths from 2-1/2 to 16 inches. 3/16″ shank, 5/16″ hex head. Patented head style countersinks itself during installation.
- 3/16″ shank, 5/16″ hex head.
- patented head style countersinks itself during installation
- No pre-drilling necessary as these have self feeding tips.
- Specially coated to install much faster and easier than lags or spikes.
- Screw has 2″ of thread at tip with 1/4″ major diameter.
- Use an OlyLog Screw that is 2 inches longer than your log stack height (e.g. use a 10″ size for 8″ diameter log).
- Save $$ on each Oly Log Screw when you purchase a full box.
- Installation torque 62 inch pounds
- Pull-out resistance 2,000 lbs
- Ultimate Shear 6,018 lbs. (104,000 psi)
- Box of 250 with free hex head driver bit.
| Product # | Each | Carton | Length | Carton lbs | Carton Qty |
|---|---|---|---|---|---|
A-24-900-04 |
$0.96 |
$159.00 |
4" |
10 |
250 |
| A-24-900-06 | $1.23 | $205.00 | 6" | 14 | 250 |
| A-24-900-08 | $1.45 | $242.00 | 8" | 18 | 250 |
| A-24-900-09 | $1.53 | $254.00 | 9" | 20 | 250 |
A-24-900-10 |
$1.66 |
$277.00 |
10" |
23 |
250 |
| A-24-900-12 | $2.21 | $368.00 | 12" | 27 | 250 |
| A-24-900-14 | $2.66 | $443.00 | 14" | 30 | 250 |
| A-24-900-16 | $3.33 | $553.00 | 16" | 35 | 250 |
LOGHOG LOG FASTENERS
LogHog is a heavy duty structural wood screw, engineered for specific log home construction applications. With its oversized head, thicker diameter and additional thread, LogHog offers increased draw-down and holding power.
- Oversized washer head and increased thread combine for dramatically increased pull-down
- Installs faster and easier than lags & spikes
- Requires no predrilling
- Countersinks into log – Allows log to settle naturally
- Draws warped logs down
- Removable and adjustable
- Eliminates jarring and damage caused by a sledge hammer
- Guaranteed corrosion resistance
- ACQ Approved
- Log Hog Screws are similar to the Oly log screws with a larger 15/64″ shank and 5/16″ hex head…as well as 3″ of threaded tip.
- Made of heat treated steel for increased strength and drivability.
- Coated for corrosion resistance.
- Gimlet point for fast drilling.
- 3″ of thread at the tip. (threaded area has 5/16″ of major diameter).
- Best to install using high torque, low RPM 1/2″ electric drill.
- Save $$ on each Log Hog Screws when you purchase a full box.
- Ultimate Tensile Strength. Avg. 4612 lbs.
- Ultimate Shear Strength Avg. 7054 lbs.
- Torque Test Avg. 263 lbs.
- Pull Out Strength, (Spruce) Avg. 2503 lbs.
| Product # | Each | Carton | Length | Carton lbs | Carton Qty |
|---|---|---|---|---|---|
| B-24-901-07 | $1.89 | $315.00 | 7" | 23 | 250 |
| B-24-901-09 | $2.04 | $340.00 | 9" | 29 | 250 |
B-24-901-10 |
$2.25 |
$374.00 |
10" |
32 |
250 |
| B-24-901-11 | $2.48 | $413.00 | 11" | 35 | 250 |
B-24-901-12 |
$2.62 |
$436.00 |
12" |
38 |
250 |
| B-24-901-13 | $2.87 | $477.00 | 13" | 41 | 250 |
B-24-901-15 |
$3.33 |
$333.00 |
15" |
29 |
150 |